LET'S GO!

Looking for product information? Click here: CR350 Measurement and Control Data Logger 

Get started

Unpack your shipping boxes.

The CR350 ships with: 

  • LET'S GO! Card with QR code for calibration certificate Watch the video! Calibration Certificates

  • USB-C cable

  • Screwdriver

  • Type T thermocouple

  • Screws and grommets for mounting (3 each)

Watch the video! QuickStart Part 1

Install your software

The CR350 is compatible with ClosedLoggerNet Campbell Scientific's data logger support software for programming, communications, and data retrieval between data loggers and a computer. and ClosedPC400 Free entry-level data logger support software that supports a variety of communications options, manual data collection, and data monitoring displays. Short Cut and CRBasic Editor are included for creating data logger programs. PC400 does not support scheduled data collection or complex communications options such as phone-to-RF.. LoggerNet is full-featured, while PC400 is our free entry-level software package.

 

Make a connection

Configure your software and connect to see live measurements.

View the steps:  USB or RS-232 communications

Watch the video! QuickStart Part 2

Create a program and wire your sensors

ClosedShort Cut A CRBasic programming wizard suitable for many data logger applications. Knowledge of CRBasic is not required to use Short Cut. is a simple way to generate a program and wiring diagram, while the ClosedCRBasic Editor The CRBasic programming editor; stand-alone software and also included with LoggerNet, PC400, and RTDAQ software. is a feature-rich program editor for use by an experienced data logger programmer who needs more flexibility than what is found in Short Cut.

View the steps: Creating a Short Cut data logger program

NOTE:

Make sure to follow your wiring diagram.

Watch the video! QuickStart Part 3

Make it yours.

Send a program

View the steps: Sending a program to the data logger

Collect and view data

View the steps: Working with data

Watch the video! QuickStart Part 4

Select your communications option

Now that you've successfully communicated over USB, select which type of communications you need to set up next.

 I only need USB.
What's next? Installation

 Wi-Fi communications option