Installation

Campbell Scientific data loggers support research and operations all over the world in a variety of applications. The limits of the CR350 are defined by your application needs. Therefore, every installation will be unique. See www.campbellsci.com/solutions .

TIP:

Time spent in the office, setting up and testing hardware and software, will make time in the field more efficient.

Recommended tools: 

  • Voltmeter
  • Screwdrivers
  • Flat-blade
  • Phillips-head
  • Small flat-blade
  • Wire cutter/stripper
  • Crescent wrench
  • Pliers
  • Pad and pen
  • Laptop computer, fully charged, with software and drivers installed
  • USB cable

Tools required to install a Campbell Scientific tripod or tower:

  • Shovel
  • Rake
  • Open-end wrench set
  • Socket wrench set
  • Magnetic compass
  • Tape measure
  • Nut driver
  • Level
  • Sledgehammer
  • Pliers
  • Flat-bladed screwdrivers
  • Phillips screwdrivers

For more information, watch a video at: http://www.campbellsci.com/videos/toolbox-for-installation-and-maintenance .