Read-only settings

Read-only TX325 settings
FieldName	Description
`GOESid`	Current ID programmed into the radio. The ID isn’t programmed into the radio until right before a radio transmission starts.
`GOESdateTime`	Current date and time (UTC) of the TX325 radio. Value is a string.
`GOESversion`	Current radio firmware version. Value is a string.
`GOESCurrentbattery`	Battery voltage in VDC.
`GOESCurrenttemperature`	Current radio temperature in degrees Celsius.
`GOESbatteryBeforeTx`	Battery voltage of the radio just prior to its last transmission.
`GOEStemperatureBeforeTx`	Radio temperature before the last transmission.
`GOESbatteryDuringTx`	Radio-battery voltage during the last transmission.
`GOESLatitude`	Latitude in decimal format of the GOES radio.
`GOESLongitude`	Longitude in decimal format of the GOES radio.
`GOESAltitude`	Altitude of the GOES radio in meters.
`GOESTimeLastGPSPosition`	Date and time (UTC) of the last GPS position fix. Value is a string.
`GOESNumberOfMissedGPS`	Number of times the radio has failed to get a GPS fix.
`GOESTimeLastMissedGPSFix`	Last date and time (UTC) that the radio failed to get a GPS fix. Value is a string.
`GOESGPSAcquisitionStatus`	Acquisition status of the radio GPS. 0 = valid GPS fix 1 = no GPS position fix, no GPS satellites in view 8 = no GPS position fix, no usable GPS satellites in view 9 = no GPS position fix, one usable GPS satellite in view 10 = no GPS position fix, two usable GPS satellites in view 11 = no GPS position fix, three usable GPS satellites in view
`GOESGPSAntennaStatus`	Status of the GPS antenna. 0 = GPS antenna is working 16 = GPS antenna is not connected 48 = GPS antenna is shorted
`GOESFailSafeIndicator`	Radio failsafe status. 1 = Failsafe has been tripped 0 = Radio is OK and Failsafe has not been tripped
`GOESDurationOfTransmit`	Duration of the last transmission of the GOES radio in milliseconds.
`GOESForwardTxPower`	Forward RF power of the transmitter in watts.
`GOESReflectedRfPower`	Reflected RF power of the transmitter in watts.
`GOESVSWR`	Voltage standing wave ratio (SWR) of the radio.
`GOESLastTxControlFlags`	Control flags used in the last transmission.
`GOESLastTxStartTime`	Start time (UTC) of the last radio transmission. Value is a string.
`GOESLastTxChannel`	Channel number used during the last radio transmission.
`GOESLastTypeCode`	Type of transmission used during the last radio transmission.
`GOESLastDatelength`	Number of bytes in the last radio transmission.
`GOESLastHDRFlagWord`	HDR flag word used in the last radio transmission.
`GOESTxResultCode`	Status of the last radio transmission. 0 = Last transmission was OK 1 = Transmission aborted, radio battery voltage is too low 2 = Transmission aborted, radio PLL lock failure 3 = Transmission aborted, radio flash is corrupt
`GOESCurrentTxState`	Current state of the radio. 0 = Idle 1 = Transmission is in progress 2 = Post transmission failsafe wait is in progress