Configuring the NL200/201 with Device Configuration Utility via USB

NOTE:

Install the device driver before plugging the NL200/201 into your computer for the first time. The device driver must be properly installed before you can connect to the NL200/201 via USB.

To install the device driver, download the latest version of Device Configuration Utility from our website. Under Device Type, select Network Peripheral > NL200 Series. Click Install USB Driver and follow the prompts.

  1. Apply power to the NL200/201.

  2. Connect the supplied USB cable between a USB port on your computer and the USB port on the NL200/201.

  3. Open Device Configuration Utility.

  4. Under Device Type, select Network Peripheral > NL200 Series.

  5. Click Browse next to Communication Port.

  6. Select the port labeled NL200/201.

  7. Click OK.

  8. Click Connect.

  9. Configure the NL200/201 as needed for your application.

  10. Click Apply to save the changes.