Configuring the NL200/201 with Device Configuration Utility via network connection

NOTE:

The NL200/201 must have an IP address before connecting via a network connection. If the address cannot be obtained via DHCP, you will need to configure your NL200/201 via USB the first time it is set up.

  1. Apply power to the NL200/201.

  2. Open Device Configuration Utility.

  3. Under Device Type, select Network Peripheral > NL200 Series.

  4. Select Use IP Connection.

  5. Type the IP address of the device in the Communication Port field. If the address of the device is unknown and the device is connected to your local area network, Browse to discover the devices on the network.

  6. Type NL200/201 in the Administrative Password box. (nl200 is the default administrative password. It can be changed via the Device Configuration Utility Deployment > NL200 Series tab.)

  7. Click OK.

  8. Click Connect.

  9. Configure the NL200/201 as needed for your application.

  10. Click Apply to save the changes.