Sensor status code
For all factory repairs, customers must get an RMA number. Customers must also properly fill out a “Declaration of Hazardous Material and Decontamination” form and comply with the requirements specified in it. Refer to the Assistance page for more information.
Modbus and some SDI-12 commands output a four-digit status code that indicates whether the sensor is working properly. The following table describes these codes.
|
Status sensor code descriptions |
||
|---|---|---|
|
Code |
Status |
Condition |
|
0000 |
OK |
No fault conditions detected in measurement period |
|
0001 |
Wind Measurement Fault |
Wind sensor faulty |
|
0010 |
Temperature |
Temperature sensor faulty |
|
0020 |
Dewpoint Fault |
If temperature and humidity are reporting correctly, this code indicates a main PCB fault. |
|
0040 |
Humidity Fault |
Humidity sensor faulty |
|
0080 |
Pressure Sensor Warning |
Pressure sensor reading not available/unit faulty |
|
0100 |
Compass Fault |
Invalid heading due to compass fault |