LoggerNet Settings

LoggerNet Clock Settings

This box is used to select a time option for the LoggerNet server.

• Use local time without correction for daylight saving time - The LoggerNet server will use the clock from the computer on which the LoggerNet server is running. However, if the computer’s regional settings are set to adjust for daylight saving time, when the time changes to daylight saving time, the LoggerNet server's time is not affected.

• Use local time with correction for daylight saving time- The LoggerNet server will use the clock from the computer on which the LoggerNet server is running. If the computer’s regional settings are set to adjust for daylight saving time, when the time changes to daylight saving time, the LoggerNet server's time will be adjusted

• Use Greenwich Mean Time (GMT) - The LoggerNet server will use Greenwich Mean Time, regardless of whether daylight saving time is applicable.

Data File Settings

This box is used to set a maximum size, in bytes, for data files. When the maximum file size is reached, the current file will be archived (with an incrementing number and a .backup extension) and a new file will be created. Entering a value of 0 or less indicates that no maximum data file size should be enforced.

Network Communications

The Datalogger Network Communications Enabled checkbox is used to enable/disable communications for the entire datalogger network. When this checkbox is cleared, you will not be able to communicate with your stations and scheduled collection will not occur.