Short Cut
The Short Cut program generator creates programs for Campbell Scientific dataloggers in seven easy-to-follow steps. Using a wizard-like interface, you create a new or open an existing program, select the datalogger, choose which sensors you wish to measure, select the measurement interval and the frequency of data stored in datalogger memory, specify advanced output options (that is, to store data based on a flag or the value of a measurement), specify what processing to perform on raw measurements for final storage, and finally generate the program. Short Cut also generates a wiring diagram for connecting your sensors to the datalogger.
Short Cut was designed to help the beginning datalogger programmer create datalogger programs quickly and easily. Short Cut effectively insulates the user from having to know the nuances of datalogger programming and the Edlog versus CRBasic programming languages. It supports the most commonly sold sensors from Campbell Scientific, as well as generic measurements (such as differential voltage, bridge, and pulse), commonly used calculation and control functions (such as heat index calculation, alarm conditions, and simple controls), and multiplexer analog channel expansion devices.
Short Cut cannot be used to edit existing Edlog, CRBasic, or Short Cut for DOS programs. Program editing and more complex datalogger programming functions should be accomplished using our Edlog or CRBasic Editor programming tools.
Short Cut was designed with extensive built-in help. Help can be accessed at any time by pressing F1. There are also Help buttons on most screens. You can also open the Help by selecting Short Cut Help from Short Cut’s Help menu. Help for each sensor can be accessed by searching the Help Index or pressing the Help button from the sensor form.
After generating the program, you can send it to the datalogger from the Results tab of Short Cut’s Finish screen or from LoggerNet’s Connect Screen or from PC400 or RTDAQ’s Clock/Program tab.