Wind speed
Each axis of the CSAT3C pulses two ultrasonic signals in opposite directions. The time of flight of the first signal (out) is given by:
and the time of flight of the second signal (back) is given by:
where:
to = time of flight out along the transducer axis
tb = time of flight back, in the opposite direction
ua = wind speed along the transducer axis
d = distance between the transducers
c = speed of sound
The wind speed (ua) along any axis can be found by inverting the preceding relationships, then subtracting Eq. 3 from Eq. 2 and solving for ua.
The wind speed is measured on all three non-orthogonal axis to give ua, ub, and uc, where the subscripts a, b, and c refer to the non-orthogonal sonic axes.
The non-orthogonal wind speed components are then transformed into orthogonal wind speed components (Ux, Uy, and Uz) with the following:
where:
A = a 3 x 3 coordinate transformation matrix that is unique for each CSAT3C and is stored in ROM memory



