PakBusAddr (PakBus Address)
The 
Pakbus PakBus® is a proprietary communication protocol developed by Campbell Scientific to facilitate communications between Campbell Scientific devices. Similar in concept to IP (Internet Protocol), PakBus is a packet-switched network protocol with routing capabilities. A registered trademark of Campbell Scientific, Inc. address of the device that will be contacted as a result of this instruction. Each PakBus device in the network must have a unique
address.
If PakBus encryption is enabled in the datalogger, by default the datalogger will encrypt the communications sent using PakBus communication. To disable encryption for one or more Pakbus addresses, use the EncryptExempt instruction. This is useful if a remote device does not support encryption (such as a CR200 or an AVW200).
Type: Integer between 1 and 4094
By default, Campbell Scientific software uses the following PakBus addresses: LoggerNet 4094, VisualWeather 4094, PC400 4093, PC200W 4092, PConnect/PConnectCE 4091, RTDAQ 4090, Device Configuration Utility 4089