SIO4Cmd

Used to configure the SIO4. The commands are listed briefly below. See the SDM-SIO4 manual for details.

Code	Description
1	Poll of available data
2	Get EPROM and memory signatures.
3	Flush all receive buffers.
4	Send data to datalogger.
5	Return number of watchdog errors, invalid command executed, and lithium battery voltage.
6	Flush transmit buffer.
7	Activate command line.
8	Poll TX buffers for data.
9	Flush converted data buffer.
66	Send single-byte data to datalogger.
67	Get return code
320	Send byte data to SDM-SIO4.
321	Execute command line command.
1024	Send string to SIO4.
1025	Transmit a byte.
1026	Serial port status.
1027	Manual handshake mode.
2049	Communication parameters.
2054	Set up receive filter.
2304	Transmit string and/or data to device (formatter/filter).
2305	Transmit bytes.