Verify module APN

Follow these steps to verify the access point name (APN) corresponds to your module.

1. Connect a USB cable between your module and computer.

2. Open a web browser and go to: http://cell.linktodevice.com.

   TIP: If the link doesn't work, browse to 192.168.86.1.  

3. On the Settings tab, the APN is listed under General.

   

4. If you are unsure which APN your module should be using, check with your cellular service provider. If Campbell Scientific provides your cellular service, the APN is listed on your provisioning report.

5. If the APN field is blank or incorrect, enter the correct APN and click Apply Changes. The module will restart automatically. Verify the APN is now displaying correctly.