Status commands
Status commands show current values of the information being requested. Some correspond to settings and others are tied to diagnostic information. All values returned are strings. Not all modems return all values. Values returned are also dependent on the network the device is connected to.
| show acc tech | Returns the access technology of the network that the modem is connected to. |
| show apn | Displays the APN (Access Point Name) currently used by the cellular module. Corresponds with the APN setting in the cellular module web interface. |
| show arev | Returns the alternate or subversion revision of the CELL200 series OS. |
| show band | Returns the band number the modem is using to connect to the cellular network. |
| show bat | Returns the current modem battery voltage. |
| show baud | Displays the current baud rate of the cellular module RS-232 port. Corresponds with the RS232 Baud Rate setting in the cellular module web interface. |
| show billing | Displays the current value for the billing cycle day. Values can range from 1 to 31. Corresponds to the Billing Cycle Day field in the cellular module web interface. |
|
show cell id |
Returns the hexadecimal number of the cellular tower the modem is connected to. |
| show cellular errors | Returns an error information summary for troubleshooting. |
| show cellular Info | Returns the modem cellular information. Information returned is extensive and includes information from other terminal commands. |
| show cellular log | Returns a log of events for the device. Useful for troubleshooting. |
|
show client port |
Returns the port number in the modem when used in Serial Client Mode. |
|
show client timeout |
Returns the time, in seconds, used in Serial Client Mode. |
|
show client url |
Returns the cellular module Client (Outbound) URL setting (used in Serial Client Mode). |
| show device info | Returns the modem device information. Information returned is extensive and includes many values returned from other terminal commands. |
| show diagnostic report | Returns a diagnostic report that is useful for troubleshooting. Combines the output of many other terminal troubleshooting commands. |
| show diversity | Displays the current setting of cellular module antenna configuration. Results are Disabled or Enabled. Corresponds with the Diversity Antenna field in the cellular module web interface. |
| show ecio | Returns the modem 3G network signal quality (ECIO). |
| show euiccid | Returns the modem EUICCID (Embedded SIM identification) number. |
| show iccid | Returns the modem ICCID (SIM identification) number. |
| show imei | Returns the modem IMEI (International Mobile Equipment Identity) number. |
| show imsi | Returns the modem IMSI (International Mobile Subscriber Identity) number. |
| show ip info #net | Returns the modem TCP/IP information for each network. When using this command, replace #net with 1 for the PPP connection, or 2 for the Ethernet over USB (RNDIS) connection. |
| show ipprotocol | Displays the current value of the cellular module IP protocol configuration. Results are IPv4, IPv6, or IPv4/IPv6. Corresponds with the IP Protocol field in the cellular module web interface. |
| show listen port | Displays the current setting for the cellular module TCP/IP listening port (used in Serial Server mode). Values can range from 1 to 65535. Corresponds with the Serial Server Listen Port Number setting in the cellular module web interface. |
| show mod arev | Returns the alternate or sub revision of the modem radio chipset. |
| show mod manu | Returns the manufacturer of the modem radio chipset. |
| show mod model | Returns the model number of the modem radio chipset. |
| show mod rev | Returns the model revision of the modem radio chipset. |
| show mode | Displays the current operating mode of the cellular module. Results are PPP, Serial Server, Serial Client, or Serial Server/Client. Corresponds with the Mode setting in the cellular module web interface. |
| show model | Returns the model information of the modem. Returned values are CELL205, CELL210, CELL215, or CELL220, CELL225. |
|
show modupdate description |
Returns the description or revision history of the firmware update. |
| show modupdate description | Returns a description of the module firmware update for user review. |
| show modupdate pending | Returns information regarding the module firmware. Informs the user that an update is available. |
| show modupdate priority | Returns the priority of the module firmware update, whether it is required or recommended. |
| show modupdate progress | Returns the progress of the module firmware update. |
| show operator | Returns the name of the cellular provider or network operator the modem is connected to. |
| show osdate | Returns the build date and alternate version of the CELL200 series OS. |
| show osupdate description | Returns a description of the newer operating system for the user to review before installing. |
| show osupdate pending | Returns information indicating if a newer modem operating system is available. |
| show osupdate priority | Returns the priority of the operating system update. |
| show osupdate progress | Returns the progress of the CELL200 series OS update. |
|
show pdp pass |
Returns the modem PDP password. |
|
show pdp user |
Returns the modem PDP username. |
| show phone | Returns the modem phone number. |
|
show ping |
Returns the status of the cellular module ping setting. |
|
show power duration |
Returns the modem on-duration time, in minutes. |
|
show power repeat |
Returns the modem Repeat cycle setting. |
|
show power start |
Returns the modem Start (power-on) Time. |
|
show ppp pass |
Returns the modem PPP password. |
|
show ppp user |
Returns the modem PPP username. |
| show reg 3g | Returns information on whether or not the modem is registered on the 3G network. |
| show reg gprs | Returns information on whether or not the modem is registered on the GPRS network. |
| show reg lte | Returns information on whether or not the modem is registered on the LTE network. |
| show rev | Returns the revision of the CELL200 series OS. |
| show roaming | Displays the current setting for the modem roaming capabilities. Returned values are Auto and Disabled. Corresponds to the Roaming setting in the cellular module web interface |
| show rsrp | Returns the modem LTE network signal strength (RSRP). |
| show rsrq | Returns the modem LTE network signal quality (RSRQ). |
| show rssi | Returns the modem 3G signal strength information (RSSI). |
| show sdc | Displays the current setting for the modem SDC address. Values are 7, 8, 10, or 11. This value corresponds with the CS I/O Port SDC Address setting in the cellular module web interface. |
| show sdc term | Returns the current value for the SDC terminal interface in the modem. Returned values are 7, 8, 10, and 11. Corresponds to the Terminal Port CS I/O SDC Address setting in the cellular module web interface |
| show serial | Returns the serial number of the modem. |
| show settings | Returns all the settings of the cellular modem. |
| show sms log | Returns a log of SMS messaging logs. |
| show smssca | Returns the modem SMSSCA (SMS Service Center Address) number. |
| show sms rx | Returns the SMS receive queue. |
| show sms send (id) | Returns the status of an SMS message. The message ID is contained in the results of the sms send command. Result codes are the same as those returned by SMSSend(). A result code of -1 means the message was successfully sent to the network. See the CRBasic help  for more information. |
| show sms tx | Returns the SMS transmit queue. |
| show state | Returns the modem state in English. Values returned could include (but not limited to) "Power off.", "Powering up.", "Powered up.", "SIM authorized.", "Setting baud rate.", "Waiting for baud rate.", "Baud rate set.", "Baud rate failure.", "Power off. Waiting for retry.", "Powered up. SIM auth failure.", "Querying modem.", "Waiting for network registration.", "Configuring modem.", "Dialing.", "Dialing (retry).", "Dialed.", "PPP negotiation.", "Network ready.", "PPP closing.", "PPP paused.", "PPP dropped.", "Terminal AT command mode.", "Firmware update mode.", “Shutting down.” |
| show state num | Returns the state number associated with show state values. |
| show time | Returns the modem current time. Time returned by the modem is set by the cellular network. |
|
show trusted 1 |
Returns the address or DNS Name in the 1st field of the cellular module Trusted IP Host setting. |
|
show trusted 2 |
Returns the address or DNS Name in the 2nd field of the cellular module Trusted IP Host setting. |
|
show trusted 3 |
Returns the address or DNS Name in the 3rd field of the cellular module Trusted IP Host setting. |
|
show trusted 4 |
Returns the address or DNS Name in the 4th field of the cellular module Trusted IP Host setting. |
| show update check | Returns information concerning the last update check. |
|
show update results |
Returns the results of a modem operating system update. |
| show usage lastmonth | Returns the number of bytes used across the cellular network in the previous month. |
| show usage month | Returns the number of bytes used across the cellular network in the current month. |
| show usage today | Returns the number of bytes used across the cellular network since midnight. |
| show usage yesterday | Returns the number of bytes used across the cellular network during the previous day. |