Serial server mode option
In serial server mode, the module receives IP communications over the cellular network and converts those to serial communications to pass on to the data logger. From the perspective of the data logger, this is no different than a serial cable connecting it to a computer.
This is the mode used with CR200-Series and Edlog (CR23X, CR10X, and CR510) data loggers, and cellular-to-RF networks. Only one IP connection at a time is supported.
A public static IP account must be used when the module is set up in serial server mode. Private dynamic IP accounts do not support the serial server mode.
Instructions in this section assume that you have established cellular service and the SIM card has been installed as described in QuickStart (integrated mode).