control of the multiplexer
For most applications, having the control the multiplexer is preferable. A CABLE4CBL or MUXSIGNAL cable connects to the multiplexer COM terminals, and another CABLE4CBL cable or the MUXPOWER cable connects to the multiplexer CLK and RESET terminals (see Example AM16/32-series to AVW200 hookup (multiplexers controlled by AVW200)).
NOTE:
When two multiplexers are connected to the , they share the CLK and RESET lines. Because of this, while one multiplexer is making measurements, the other multiplexer will advance its channels but without making any measurements.
