Status
The Status table is an automatically created data table. In CampbellCloud view the Status table fields under Assets > Summary.
BattCapacity
Estimated remaining battery capacity (Ah).
BattCharge
Amount of charge the solar panel added to the battery (W).
Current (BattCurrent)
Average current flow out of the battery (A).
State of Charge (BattStateOfCharge)
Estimated remaining battery capacity (%). The ratio of BattCapacity to the full battery capacity. This is similar to the amount of fuel remaining in the tank.
State of Health (BattStateOfHealth)
Value reported by the fuel gauge indicating how much the battery has degraded (%). 100% indicates a new, healthy, battery.
Temperature (BattTemp)
Current battery temperature (°C). Updates once per minute, when viewing the Status table, or programatically.
Voltage (BattVoltage)
Voltage (VDC) of the battery powering the system. Updates once per minute, when viewing the Status table, or programatically.
Hourly Allowed Up Time (CellHrlyAllowedUpTime)
Estimated time per hour that the cellular modem may be on (seconds). This is automatically reduced as the battery health (BattStateOfHealth) declines.
Hourly Up Time (CellHrlyUpTime)
Estimated time per hour that the cellular modem was on (seconds). Resets hourly, with a button press, or direct communications.
When this exceeds the (CellHrlyAllowedUpTime) the modem will not attempt communications. However, the Aspen 10 will not interrupt communications when the threshold is met.
Time Taken to Register (CelLastRegTime)
The last time it connected, how much time it took the modem to connect to the cellular network (seconds).
Last Up Time (CellLastUpTime)
The last time it connected, how much time the modem was connected to the cellular network (seconds).
Cell Operator (CellOperator)
Name of the cellular provider, or operator, the modem is connecting to.
Signal Quality (CellSigQuality)
A unit-less number indicating the signal quality of the modem. Ranges expected:
Excellent: 0 to >-9
Good: -7 to -9 to -12
Fair to Poor: -11 to -13 or less
Signal Strength (CellSigStrength)
The signal strength of the modem (-dBm). Ranges expected:
Excellent: -90dBm or less
Good: -90dBm to -105dBm
Fair: -106dBm to -115dBm
Poor: >-115dBm
Number of GNSS satellites in view (GNSSNumSat)
Unit-less number of global navigation satellite system (GNSS) satellites in view.
Success Rate (MQTTSuccessRate)
Successful attempts to communicate with CampbellCloud (%).